Hasu Walnut Wood Fabric Shade Ceiling Fan for Living Room & Bedroom

Hasu Walnut Wood Fabric Shade Ceiling Fan for Living Room & Bedroom by Decolune. A printed fabric shade takes the place of glass here, so the light comes through softened and warm rather than sharp, and the whole fixture feels closer to a piece of textile art than standard fan hardware. Hasu takes its name and its softness from the lotus, pairing a printed fabric shade with dark walnut wood blades and matte black hardware for a fixture that reads as considered rather than purely mechanical. The fabric diffuser is lighter than glass and spreads light into a gentle, ambient wash instead of a hard beam, while the pattern printed into the fabric adds a quiet layer of visual texture without shouting for attention. Underneath the calm surface sits a variable frequency DC motor that runs quietly across six speeds and reverses direction, so the same fixture cools a room in summer and helps recirculate warm air along the ceiling in winter. It's built as a genuine dual-purpose fixture, not a fan with a light bolted on as an afterthought, and the walnut and black pairing keeps it from reading as overly decorative. It complements transitional, wabi-sabi, and warm contemporary décor.

Underneath the fabric and wood, a pure copper DC motor drives six fan speeds with reverse rotation, running quietly enough to sit in a bedroom without the buzz of a typical AC motor, and drawing about 48 watts across its variable frequency range. The integrated LED offers a choice of 3000K, 4000K, or 6000K color temperature selected at checkout, and it runs on AC 110 to 240 volts at 60Hz. Control comes from an included handheld remote; a standard wall switch will not operate this fixture, so wall control requires a compatible wireless wall switch purchased separately rather than any switch you already have. It ships in two models, Model A with an 11.8 inch drop and a 35 by 10 centimeter shade, and Model B with a shorter 15.7 inch overall height and a 29 by 13 centimeter shade, and both are available in 36, 42, 48, or 52 inch blade spans to match your room size. The standard hanging rod combines a 3.9 and a 7.9 inch section for 11.8 inches total, extendable on request for taller ceilings, with a 5.9 inch canopy at the mount point. It's hardwired, rated IP20 for indoor use only, and certified for use in North America, the EU, Australia, and Saudi Arabia.

Sizing follows the room: the 36 inch span suits a smaller bedroom, 42 inches fits a standard living room, 48 inches handles a larger space, and 52 inches is built for an open floor plan or a room with higher ceilings. Model A, with its 11.8 inch suspension drop, generally needs 9 to 10 feet of ceiling height to hang comfortably, while Model B sits closer to the ceiling and works with 8.5 feet or more; a flush mount without any suspension rod is also available if you contact us with your order number after purchase. Installation is hardwired, so we recommend a licensed electrician, and it's worth knowing upfront that a standard wall switch won't operate this fixture, since it needs either the included remote or a separately purchased compatible wireless wall switch for wall control. The shade's pattern is printed onto the fabric rather than woven into it, which is intentional and adds character to the piece, and it's best cared for with a soft, dry cloth rather than any moisture or harsh cleaner. This fixture is for indoor use only and isn't suited to bathrooms or other damp spaces, and the hanging rod can be extended on request if your ceiling sits higher than the standard drop allows.

Canopy: ⌀5.9" (15 cm) · Hanging rod: 3.9" + 7.9" = 11.8" (30 cm), extendable

Model A — H11.8" (30 cm) · Shade: 35 cm × 10 cm

Size reference - Model A

Model B — H15.7" (40 cm) · Shade: 29 cm × 13 cm